Pre-Beginner II
page twoIf you are going to be using Elements for anything more than quick edits of snapshots, you’re going to need (and love) the clone stamp tool. This tool used to be called the rubber stamp and most old timers still call it that.
Close the document that was used for demonstrating selections and layers. Don’t save. Go to File > New and choose Default Photoshop Size as before. Make sure Mode is set to RGB Color and for Contents, you have the White radio button selected. Click OK to create the new document.
Choose Edit > Fill. In the Fill dialog, from the Use menu, choose Pattern. Click on the Custom Pattern thumbnail to open the pop-up palette. From the palette menu, choose Nature Patterns. When that palette has loaded, click on the Leaves pattern. It’s the second thumb from the right in the top row (next to the Blue Daisies). Click OK to fill your document with the leaves pattern.
In the toolbox, choose the brush (formerly known as the paintbrush). It’s about half way down the left side of the toolbox.
At the left end of its options bar, click on the brush thumbnail to open the brushes pop-up palette. Choose the Hard Round 19 brush (should be the last thumbnail in the first row).
Press the D key on your keyboard to restore the default colors and then press the X key to switch foreground and background colors. [Though I use capital letters for shortcuts, they are lowercase, i.e. you don’t need to press the Shift key.] White should now be your foreground color.
Click on five places on your document to add white spots anywhere on the pattern. Placement doesn’t matter. Just click once on five separate locations.
Click on the zoom tool in the toolbox to select it. It’s the last tool on the right side, just above the color squares.
Click repeatedly on one of the white dots that you just added until you’ve zoomed in very close. A quicker way to zoom in is to press and hold the left mouse button and then drag a box with the zoom tool over the area that you want to zoom to. When you release the left mouse button, your screen will fill with the boxed area.
start
Tips
Elements Tools
Elements Palettes
Brushes in 7
Using PS7 Brushes
7 Basics
7 Reference: Tools
7 Reference: Palettes
Reference: Effects
Selections
Channels
Basic Layers
Basic Pen
How Much?
Color Management
Color Correction
Curves, Levels, or Brightness/Contrast?
Combining Images
Combining Images II
Combining Images III
Compositing in Photoshop
Perfect Blend
Multicolor Fill
Dodge and Burn
Duotones
Styles On Masks
Organic Textures
Abstract Background
Make a Frame
3D Wire Text
Doodling
Note that the clone stamp is grouped with the pattern stamp tool. Their icons look very similar, but the pattern stamp only paints with patterns. Be careful not to pick it instead of the clone stamp. You can tell the pattern stamp’s icon by the little bit of checkerboard on its left side. Don’t pick the one shown below; pick the one shown above.
Once you have the clone stamp selected, deselect the Aligned option on its options bar. Check (select) the Use All Layers checkbox. For details on what those choices do, please see my page on the clone stamp in the Tools section of this Web site.
Click on the brush thumbnail at the left end of the options bar. Make sure the Default Brushes palette is chosen from the menu at the center top of the pop-up palette. From that palette, choose the Soft Round 9 brush. It should be on the left side of the second row with the number 9 under the thumbnail. If you’re not sure which brush that is, hover your cursor over the brush thumbnails to see the brush names in the tool-tip.
Open the Layers palette (Window > Layers). Click on the New Layer button at the bottom of the palette.
Once the new layer appears, double-click directly on its name (Layer 1) and name it to something descriptive such as “My Clones.” Make sure that layer is always selected in the Layers palette as you are cloning.
In the future, whenever you do clone edits to an image always, always, always do them on a separate layer. Then make sure you have Use All Layers checked on the tool’s options bar. By cloning to a separate layer you are free to make as many mistakes as you like without ever harming your picture. You can also turn off visibility for the clone edits layer to see how you’re doing. And if you make a big mess, you can delete the whole layer.
Look carefully at the white dot that you have zoomed in on. Pretend that this is an image that has been damaged. You need to remove the white spot and make it look like it was never there. To do this, you need to copy bits of the surrounding picture and use them to cover the spot.
Find a spot next to the white dot that looks like it was the same color and texture as the part of the image that is covered by the white spot. Press and hold the Alt key and click on that color. When Alt-clicking with the clone stamp, you’ll see a special crosshairs cursor. The Alt-click is the copy step of clone stamping. You always start by Alt-clicking to pick up your ‘sample.’ The sample is the bit of copied image data that will be applied to cover the blemish (the white spot).
Release the Alt key. Move your cursor over the white spot where you think the color that you just clicked on should be applied. Left click to apply the copied data to the spot. While you can stroke (press and hold the left mouse button as you drag), I recommend that you always use clicks to apply your clone edits. If you want to cover a larger area, use a bigger brush. Resample (Alt-click) often to avoid visible repetition of the same copied spot.
This leaf pattern is not an easy picture to clone over. It’s filled with lines and abrupt color changes. If you can do a good job of covering your white spots, you are doing very well. Take some time to practice. Remember that the clones are on their own layer. You can use the eraser to remove mistakes (or use Undo).
When you are trying to cover an area that looks like it would contain the continuation of a hard edge or line, try to Alt-click so the copied hard edge crosses exactly the center of your brush cursor’s circle.
Then when you click to apply, make sure the center of the brush cursor edge lines up with the existing line end.
By centering the same part of the brush circle on the line end and applying the sample, you can continue the edge in a convincing manner.
Ideally, for cloning, you want to use a brush that is not as hard as the default hard brushes in the pop-up palette, and not as soft as the soft ones. The former have Hardness of 100 % and the latter’s Hardness is 0 %. In Elements 2, you don’t have access to the Hardness settings while using any tool other than the brush, but you can use the keyboard shortcuts of Shift with the square bracket keys (to the right of your P key on the keyboard) to change brush hardness. Shift with the left bracket softens; Shift-right-bracket hardens. There are three intermediate hardness settings that you can get with this shortcut combo (so pressing the shortcuts four times gets you to the other extreme of hardness/softness).
A very soft brush loses texture and detail in the copied image data. A very hard brush leaves visible round edge marks when you apply your clones.
Older Tutorials
Quick Mask
Rubberstamping
More Adjustments
Sharpening
Filters
Color
Elements Basics
Reference: Elements Tools
Reference: Elements Palettes
How Do I...?
Gotcha
Pre-Beginner
Pre-Beginner II
Why Layers?
Holes
Fade In
Playing With Styles
Learning Effects
Redeye Removal
Artistic Filtering
Symmetrical Flowers
Simulated Alpha Channels
Layer Masks
Multilayer Masks
Displacing Textures
There are a number of compression schemes that can be used to try and make the recording process more efficient (for example the computer can look for blocks of pixels that are colored the same and record the block rather than each pixel within it) but in general, image files are relatively large, often very large depending on the pixel dimensions and amount of detail in the picture.
When you use Elements’ painting or editing tools to alter the color data, your computer duly updates its records for each affected pixel.
If you change the number of pixels in your file by making your document’s pixel dimensions larger or smaller, your computer has to invent (by a best various “best guess” techniques known as resampling) what the color data should be for the added pixels or which pixels to throw out when subtracting pixels. Depending on the degree of resizing, this can result in significant loss of quality in your picture.
Vector objects are entirely different. In Elements, all of the shapes found in the shapes tool group (fourth tool down on the left side of the toolbox) as well as type created with the type tool (fourth tool down on the right side) are vector.
Each vector object is recorded as a discreet unit. Your computer saves a mathematical description of the outline of the object, and a definition of what is used to fill that outline. Fill can be a solid color, a gradient, or a pattern (use Layer > Change Layer Content to get gradients or patterns). As with the outline, the fill has to be something that can be generated from a logical description. Vector files are basically blueprints from which an object is built on demand.
Because the outline is mathematically generated, it is hard edged; it cannot have any blurriness at the border. A color is either in the shape or not in the shape. There is no in-between.
For regular geometric shapes, for example, a red circle, when saved on your computer, a vector file is tiny. It contains only the definition of the outline (draw a circle of X diameter) and a description of the fill (fill with RGB colors of 255,0,0).
If you resize a vector object, it never loses quality. The only thing that is changed is the mathematical description of the objects dimensions. The outline is redrawn and the new, resized object filled with the same color. And the file size remains tiny.
If you think about what I’ve just told you, you’ll understand why the painting and editing tools as well as filters and most of the image edit commands in Elements will not work on vector objects (on type or shapes). In a vector object, the color and position of individual pixels is not recorded. The only description in the file is of how to generate the outline, and what fill should be “poured” into that outline. If you use paint or edit tools, you would be asking Elements to alter individual pixels within the object. Elements doesn’t know anything about individual pixels within the shape. It knows only about the outline and the kind of fill.
If you still have your clone document open, zoom back out to 100 %
by double-clicking on the zoom tool’s
icon in the toolbox.
With your clone edit layer selected in the
Layers palette, choose Edit >
Fill and choose White from the Use menu. Click OK.
Press the D key on your keyboard to make
black your foreground color, then choose the shape
tool in the toolbox. It’s the fourth one from the top on the
left side of the toolbox. On its options bar, choose the ellipse. Then
click on the ellipse icon at the extreme left end of the options bar.
Choose Reset Tool from the menu that appears.
Drag a nice big ellipse on your document. Creating a shape is the same
as creating a selection—drag diagonally across the dimensions of
the desired ellipse.
When you first create a shape, it is selected.
A selected shape has a slightly iridescent outline (though it doesn’t
show color against the black that I’ve used) and is jagged looking.
If you’re using one of the more complicated custom shapes, it’s
easier to see what you’ve got if you deselect (click on another layer).
The edge ‘grittiness’ will then go away.
To reselect a shape, you use the black
arrow that is part of the shapes group (find it on their options bar
or from the flyout in the toolbox).
To select type, use the type tool as you
would in a word processing application.
The other selection tools (the
lassos, marquees, magic
wand or selection brush)
have no effect on vector objects. They ignore regular ‘marching ants’
selections. You cannot alter any limited part of a vector object. You
can only alter the whole object. So what’s the point in using the
black arrow? You can transform
a shape by selecting it, and then choosing Image > Transform Shape.
Using the transform bounding box, you can size, and distort the object.
Also, if you create more than one shape
on a single layer, you can use the black arrow to select one of the shapes
in order to reposition or otherwise transform it. Find out more about
shapes on my shapes page in the Tools
section.
If you try to edit a shape with any of the
regular tools, you get an alert asking if you want to Simplify the layer.
You get a variation of that message if you try to use any of the tools
or filters on a type layer.
If you click OK, your vector shape layer that you can see in the Layers
palette with its sharp outline—
—will be turned into a regular raster layer that can be edited like
any other image layer, but which loses the vector advantages of resolution
independence, crisp edges and small file size.
As written in the type alert, shown, you also lose the ability to edit
your type. Once simplified (or rasterized), your computer sees the type
as just a bunch of colored pixels, not letters and words.
There’s one last peculiarity that I’ll
mention about vector shapes and type. You can’t ever really get rid
of them except by deleting their layer. To demonstrate, choose the crop
tool in the toolbox. It’s the third tool from the top on the
right side of the toolbox.
Drag a crop box that includes only a part of the vector ellipse that you
created a moment ago. Click the big checkmark on the crop tool’s
options bar to accept the crop.
If your shape has been deselected, click
with the black arrow on what you
can see of the shape in the image frame to reselect it.
Now, click on the bottom right corner of
your document window and drag to enlarge it so you can see the gray area
outside the image area. The shape is still there, in its entirely. Even
if you use the move tool to drag the shape
completely out of the image and drop it in the gray area, out of sight,
it’s still there.
If you deselect it, you can’t see it, but it’s still there.
Don’t believe me? Try it. Use the move
tool to drag your ellipse completely out of the frame. Deselect by
clicking on another layer in the Layers
palette. Then choose the crop tool
in the toolbox and drag a crop that completely surrounds your remaining
image. Press both the Alt and Shift keys and drag outward on a corner
handle of the crop box to enlarge box to be big enough to include where
you think you dropped the shape (you won’t be able to see it at this
point). Click OK to accept the crop (that’s a quick way to increase
your canvas size). There is your shape, good as new.
Type layers are even more fun. If you crop
them, they really look like they’re gone. Try adding some large type.
Crop the image. Click on the remaining
type with the move tool and drag it back
into the image frame. Ah. It’s gone! You’ve succeeded. Check
the Show Bounding Box option on the move tool’s
options bar. Uh oh. The bounding box encloses all of the original
type, even though you aren’t seeing the cropped part. Choose the
type tool and drag over the empty part
of the box. The cropped type pops back into sight, good as new (fun for
idle minds).
Vector objects are like those monsters
in horror movies that are never really dead. The only way to
get rid of them is to kill the whole thing by deleting the entire layer.
Then it’s gone. As I keep repeating, with vector shapes, it’s
all or nothing.
If you would like to download a zipped pdf file of this tutorial, please
click on the link below and save it to your hard drive.
Pre-Beginner II pdf
100 KB
If you don’t know how to expand a zipped file or use Acrobat Reader,
download the file above and then go here
to find instructions.
Please note: if you wish to email me, do not send attachments. My server is set up to delete any mail over a modest size, so I will never see your mail. Please ask before sending any pictures or attachments of any kind.
Photoshop Books
Unreal Nature
Shadows and Light
FreePhotos
Filler Images
Elementary School
Advanced Elements
The Belief Game
Animal Rights
Copyright © 2002 by Jay Arraich.
All rights reserved.
All photographs copyright ©2002 by Jay Arraich
jay@arraich.com
start
Tips Index
Elements Tools
Elements Palettes
Site Index