Channels
page oneWhat are channels, and why should you care? Because they give you the power to control the degree to which pixels are affected by everything you do.
When you open any color image in Photoshop, each color in the image will be represented in the Channels palette by a color channel. For example, RGB images open with a Red, Blue, and Green channel, as well as a composite RGB channel. We’ll discuss them later.
First let’s consider the channels you create by saving a selection, or clicking the New Channel button in the Channels palette. These are called alpha channels. Alpha channels are saved masks. Masks are saved or stored selections. Selections are maps that tell Photoshop how much to apply color, effects, filters, or adjustments that you make while that selection is active. Understand that masks and selections are different forms of the same thing . Selections are temporary masks. Masks are stored selection maps. Alpha channels don’t show up in your image. They are stored selection maps which you can edit, and reuse as many times as you like. They are saved with the image so long as it is in Photoshop’s psd format.
An alpha channel is a black and white ‘map’ of your color image. Where it is black, when loaded as a selection, it tells Photoshop, “leave these pixels unaffected by any changes.” Where it is white it tells Photoshop, “make these pixels 100 % affected by any color, filters, or adjustments applied.” Where it is gray, it tells Photoshop to affect those pixels in the same percentage as its shade. Lighter gray gets more affected; darker gray gets less affected.
To show you that selections and masks are the same thing, try the following demonstration. Choose File > New to make a new white document. Create a new layer by clicking the New Layer button in the Layers palette. Make sure this new, empty layer is selected.
Select the Type tool. In its options bar, choose the Masked Type tool (the T with a dotted outline, second from the left), set its options to Helvetica, Bold, 72 pt, and Strong (for anti-aliasing).
Type a capital A. With the letter’s selection outline active, choose Edit > Fill. Click the color square in the Fill dialog box to pick a color. I chose a bright red for my color; you can use black if you prefer.
Next, go to the Channels palette. Click the New Channel button at the bottom of the palette. Your white document will turn completely black. This is simply the new channel which is a mask covering the entire image. Choose the Mask Type tool again with the same settings. Click on the black mask, and type a capital A. Choose Edit > Fill and pick White from the menu. Choose Select > Deselect, or press Ctrl-D to deselect the white A on the mask. In the Channels palette, with the new channel still selected (showing dark blue) click on the Load Selection button, or go to Select > Load Selection and choose Alpha 1 from the dialog box’s menu. Click on the composite RGB channel at the top of the Channels palette to make it active, and deselect the new alpha channel. Choose the Eyedropper in the toolbox and click on the first letter A you made to make its color your foreground color. Choose Edit > Fill and pick Foreground from the menu.
Now, compare the two letters. They are identical.
Just in case you’re still doubtful, here is a magnified view of the bottom of the two A’s shown above.
Ah, but this magnified view brings us to the next part of what masks and selections do. Notice that some of the pixels are neither red nor white, but are various shades of pink. Anti-aliasing was checked in the Type Mask tool’s options bar when the letters were made. This is an image effect. It is a form of instruction. It says “add some intermediate shades just here, and here”. In fact, it is even more precise than that. It says “at this pixel, add this exact shade, and at this one, add this particular shade.” Masks and selections are pixel maps telling Photoshop, How Much? for every single pixel.
Let’s look at a close up of the mask at the enclosed part of the letter A, shown below.
I’ve made a screen shot of an extremely magnified portion of the bottom right corner of the triangle, and numbered all the shades of gray. Remember, this is the mask, not the red image.
If you choose the Eyedropper, and drag it over the shades of gray, the Info palette will show the following results:
- Pure white
- Pure black.
Note that you are seeing RGB values since this is a screen capture, not
the original mask. The mask would show only K, or black percentages as
masks are grayscale, not RGB.
When that mask was loaded as a selection,
and filled with a color, I got the result shown below.
As you can see, the mask has provided pixel by pixel instruction for how
much the color you added should affect the existing, base image (in this
case, white) pixel’s colors. More here, less there.
Let’s look at a photograph. I have added a color gradient to the base of the image to help you see what is happening when I show you individual color channels.
Tips
7 Tools
7 Palettes
Brushes in 7
Using PS7 Brushes
7 Basics
7 Reference: Tools
7 Reference: Palettes
Reference: Filters
Reference: Effects
Selections
Channels
Basic Layers
Basic Pen
How Much?
Color Management
Color Correction
Curves, Levels, or Brightness/Contrast?
Combining Images
Combining Images II
Combining Images III
Compositing in Photoshop
Perfect Blend
Multicolor Fill
Dodge and Burn
Duotones
Styles On Masks
Organic Textures
Abstract Background
Make a Frame
3D Wire Text
Doodling
Older Tutorials
Quick Mask
Rubberstamping
More Adjustments
Sharpening
Filters
Color
Elements Basics
Reference: Elements Tools
Reference: Elements Palettes
How Do I...?
Gotcha
Pre-Beginner
Pre-Beginner II
Why Layers?
Holes
Fade In
Playing With Styles
Learning Effects
Redeye Removal
Artistic Filtering
Symmetrical Flowers
Simulated Alpha Channels
Layer Masks
Multilayer Masks
Displacing Textures
I clicked the composite RGB channel to select it, and deselect the alpha channel I just created. I then loaded the channel as a selection by choosing Select > Load Selection, or by clicking the Load Selection button in the Channels palette. With the gradient selection active, I chose Edit > Fill. I picked White from the menu and clicked OK.
Note that if you try this, you will see that the ‘marching ants’ selection outline will contain exactly one half of the image, not all of it, even though the selection included all of the image. This is because the marching ants selection outline only includes pixels that are more than 50 % selected. The rest of the image was in fact selected, but in steadily decreasing amounts due to the gradient mask.
Here is what I got. As you can see, where the mask was lighter, the white
fill color has been allowed to affect the base image to a greater degree.
Where the mask was darker, it has allowed the white to affect the base
image less.
A reading taken with the Eyedropper from exactly the center of the mask
(not the image)
would show a reading in the Info palette
like this:
Channel masks are created in Grayscale and K is the letter used for black. If you drag the Eyedropper across the gradient mask while watching the Info palette readings, you will understand that there are 255 degrees to which Photoshop can be told to affect each pixel with any colors, adjustments, or filters applied while a selection created from that mask is active.
Continue on page two
Unreal Nature
Shadows and Light
Photoshop Books
Photoshop Links
FreePhotos
Filler Images
Elementary School
Advanced Elements
The Belief Game
Animal Rights
Copyright © 2004 by Jay Arraich.
All rights reserved.
All photographs copyright ©2004 by Jay Arraich
jay@arraich.com
Tips Index
7 Tools
7 Palettes
Site Index